Architectural Precast, Concrete, Brick & Block Restoration Products

CHOOSING THE RIGHT STONE CLEANING PRODUCTS

Imagine taking a shower and not using soap, or washing the dishes with oil instead of dish washing detergent! This may alarm you as much as it does us when we see contractors using mediocre or incorrect products to perform building maintenance services. For example, many times pressure washing is performed on concrete without using chemical cleaners, and without the application of a sealer after the pressure washing is finished.

Properly selected cleaners loosen many different types of soils that adhere to concrete similar to the way dishwashing detergent carries oil away from dirty pots and pans. De-greasers help to loosen oils and grease, bleaching agents work to remove mold and algae, acids work to remove stains such as rust and efflorescence. In conclusion, choosing the right product is essential to the overall outcome of the project.


It’s important to choose the most suitable product for: 1) The stone material to be cleaned, and 2) The stain that is to be removed. 


Many times the wrong product is selected due to the consideration of only one of these factors, and the desired results are not achieved. Presto has developed a product to tackle every stain commonly found on stone surfaces.


When the correct products are used, stone is restored to a state similar to that of it's original manufactured condition. When a test area is performed using our products versus our competitor's products, it is visibly clear that Presto's products provide the most impressive results on the market.


Stone Restoration Before After Photos
View Before & After Photos





Precast Concrete, Masonry & Natural Stone Restoration


REASONS TO SEAL STONE SURFACES AFTER CLEANING

Sealers should be used after the stone cleaning process to close up the pores of the concrete or stone, in order to prevent the penetration of water and oil which act together to stain the stone again. Sealers will help keep stone cleaner for longer and help to protect from water damage, therefore, prolonging the life of the material.

When restoring stone, it is always important to identify the cause of the stain, and prevent the stain from reoccurring at the source. After restoration, and curtailing the source of staining (if possible), it is important to protect the surface in order to help prevent future restoration.
  • To prevent the need for frequent pressure washing - Sealed stone stays cleaner for longer, and resists staining and discoloration.
  • To guard adjacent materials from mineral leaching - Excess minerals leach from precast onto architectural glass, metal, and other materials where mineral stains are form relatively quickly. Sealing your precast keeps adjacent windows looking cleaner for longer.
  • To prevent oil, water, and stain penetration - Many types of soils can adhere to stone surfaces: vehicle exhaust, tree sap, fluid from leaking vehicles, and many other environmental contaminates.
  • To prevent mold and mildew - Sealing stone material prevents the penetration of water. Without water, green and black algae stains are unable to develop as they normally would.
  • To avoid water damage - If water is allowed to penetrate your precast, it starts to erode the bond that holds the stone together. This is especially damaging during winter months as water freezes and expands, compromising the strength and bond of the manufactured stone composition. This causes cracks, and even separation of material components, and is extremely expensive to repair. In situations with precast panels, water damage normally only occurs at the surface level, therefore requiring a product designed for superior surface protection.
  • To protect your steel components - If water is allowed to penetrate your concrete, and is exposed to steel components that hold your building together, they will start to rust. This can cause structural damage and material staining.

SELECTING THE RIGHT STONE PROTECTION

There are many different types of water repellant materials available today. Silanes, siloxanes, silicones, acrylics, waxes, epoxies, siliconates and fluoropolymers; just to name a few. In addition, many of these materials can be mixed together to create a totally new material for use on various surfaces. It is important to not only chose the correct product for the required application, but to also ensure that the product is applied properly. 

Presto is the first company in the world to create an exclusive line of products to specifically combat the problems involved with precast leaching onto, and staining, adjacent glass surfaces. 

Below are links to our suitability charts for cleaning and sealing many different types of stone materials. These charts will guide you to the product best-suited for your specific stone restoration or stone sealant need.

RESTORE, PROTECT AND MAINTAIN



RESTORE, PROTECT AND MAINTAIN

It is critical to select the right combination of products to protect the environment, and maintain the exterior beauty of your building. Presto has designed products to work synergistically – not against one another. 

Follow Presto’s three-step process: Restore, Protect and Maintain.

STONE RESTORATION PRODUCTS

Stone Restore® CT (Citrus Technology): Powerful, environmentally friendly, citrus-based concrete cleaner clears the toughest oil stains as found in parking decks

Stone Restore® NC (Neutral Duty):
 A medium duty restoration cleaner specifically developed for use on chemically sensitive architectural stone surfaces such as limestone, marble and travertine

Stone Restore® PS (Polished Stone):
 A mildly abrasive restorative cream that removes waterproofing overspray, lime and calcium stains, soap scum and other tarnishes from polished stone surfaces

Stone Restore® CB2 (Chlorine Bleach): Double-strength chlorine bleach contains builders and surfactants that effectively fight oil stains and microorganisms such as green or black algae and mold allowing them to be easily removed using water

Stone Restore® A+ (Alkaline Technology): Removes stubborn environmental staining as well as oil and grease stains from most types of stone

Stone Restore® HD (Heavy Duty): Acid-based cleaner for all types of stone that effectively removes a wide variety of stains, including mineral-based stains such as efflorescence and rust; special precautions are required when using this product to clean limestone, marble or travertine

 

STONE PROTECTION PRODUCTS

Leach Stop®: Clear, penetrating treatment designed to protect GFRC, precast and concrete surfaces from mineral leaching, stain development, water penetration and water erosion

ElaSticone®: Invisible, long-lasting silicone treatment that protects stone surfaces from water penetration, erosion and stains caused by mold, mildew, rust, efflorescence and more for up to 10 years

ElaSticone GSX®: Protects masonry and stone surfaces from water, oil, graffiti and more; allows graffiti to be removed from surfaces up to 10 times before needing reapplication

Protect-A-Stone®: Clear, penetrating sealer that utilizes proprietary UV-resistant fluorochemistry to create a barrier against oil, water and stains without altering the stone’s appearance; protection can be renewed with ReJuviClean® stone preservation product

Stone Guardian®: Clear, deep-penetrating surface protection that utilizes proprietary UV-resistant fluorochemistry for superior water, oil and stain resistance; protection can be renewed with ReJuviClean® stone preservation product

ReJuviSeal®: Clear, penetrating sealer that utilizes proprietary UV-resistant fluorochemistry to create a barrier against oil, water and stains without altering the stone’s appearance; protection can be renewed with ReJuviClean® stone preservation product

Stone Enhancer® HD: Film-forming, acrylic-based protective treatment leaves an enhanced shine on stone surfaces

Stone Enhancer® MD:
 Invisible, film-forming, acrylic-based protective treatment leaves an enhanced shine on stone while maintaining a breathable surface


Presto’s ElaSticone applied to a 
stone surface. The protected 
stone forces water to bead up and 
run off the surface.

 


After one month of oil and 
transmission fluid on a stone surface protected with Protect-A-Stone. Coating allows for beading and not penetration of outside elements.

 


STONE MAINTENANCE PRODUCTS

ReJuviClean®: Light-duty cleaner that renews three oil, water and stain repellants in Presto’s product line (Protect-A-Stone, Stone Guardian, ReJuviSeal)

Green-Kleen®: H2O2 technology with ultra pure water creates a powerful cleaner for multiple surface types; leaves no residue to interfere with protective coatings; should be used with heated, deionized water for superior results

— Capturing the water in cleaning processes is essential to protect our environment. Never allow any cleaners, oils or other products - even biodegradable products - to wash down drains. Building owners, property managers, and service contractors are subject to large penalties by the EPA if caught allowing degreasers or oil to run into drains. Presto supports the EPA in their efforts to prosecute offenders.

Click here to view all of Presto’s Stone products