ReJuviClean is a unique formulation that both cleans and renews protection against oil, water and stains on concrete and stone surfaces. This product is designed for high-performance building restoration and preservation applications.
This product is a specially formulated, proprietary blend of fluoropolymer chemistry and cleaning agents designed to clean stone surfaces while rejuvenating oil, water and stain repellency applications. This product is designed to be used on surfaces previously treated with Presto’s ReJuviSeal®, Protect-A-Stone® or Stone Guardian® products. If desired, ReJuviClean may be used on unprotected surfaces. Applying ReJuviClean five times is equivalent to applying one full-strength coat of ReJuviSeal. This product contains ingredients that react with the silica within the stone to form a protective barrier against water, oil and stains.
Protection will begin immediately after sealant dries on the surface. Cure time for maximum water and stain protection is 24-72 hours. Application rates, concentration, temperature and humidity can impact dry and cure time.
For buildings: This product is designed to seal precast while it cleans. It is suitable for a variety of stone surfaces, and functions to create an oil-, water- and stain-repellent finish. It protects against stains and is safe on glass and metal surfaces.
For parking garages: This product should be used to clean surfaces that need to be protected from water, oil and stains. For best results, use ReJuviSeal, oil-repellent finish, on the surface in order to protect concrete from vehicle stains like motor oil and transmission fluid. Use ReJuviClean on a regular basis with a street cleaner, concrete cleaning machine or pressure washer to maintain maximum repellency and keep the surface clean.
For driveways: Driveways previously sealed with ReJuviSeal or Protect-A-Stone can be easily maintained using this product. Simply rinse down the driveway using ReJuviClean to clean any soils that may have accumulated and renew the water, oil and stain repellency.
For Polished Stone: This product can also be used with a spray bottle and a rag to clean and install protection simultaneously on polished stone surfaces.
In many instances, a combination of different stone cleaning products is necessary for various stone surfaces depending on their level and type of staining. Presto offers a complete line of stone cleaning products for all situations, including:
For ongoing maintenance of the protected surface, simply wash or wipe the surface again with ReJuviClean. It will clean and protect the surface simultaneously.
The information provided by Presto for the safe and effective use of this product, and all of our products, is believed to be good and accurate. However, due to the many different possible applications of this product, careful considerations should be made when selecting its suitability for each surface.
The information provided should never be substituted for individual testing to ensure the product’s compatibility with each surface intended for use. The purchaser shall assume all responsibility for determining the suitability of this product. When used as intended, this product will perform as stated. No other warranty can be made for this product, verbally or written.
Presto warrants this product to be free from defects. In the event this product is found to be defective, we will provide a sufficient amount of product to replace the defective product.
View our Stone Restoration Pictures Featuring projects that utilized our many products for their buildings restoration, maintenance or cleaning project.
After cleaning or sealing stone surfaces the glass windows and metal frames almost always need to be cleaned, and many time window spots and stains removed as well. View our glass and metal products that compliment our stone restoration and protection arsenal.
DON'T FORGET THE GLASS & METAL
View All Products > Architectural Precast, Concrete, Brick & Block Restoration Products > Stone Maintenance Products >