Stone Restore A+

Stone Restore A+ (Alkaline Technology) removes stubborn environmental staining as well as oil and grease stains from most types of stone.

DESCRIPTION 

This product contains a combination of environmentally friendly surfactants, builders, solvents and acids, which are developed for cleaning stone surfaces of all types. This product removes a thin layer of substrate at a molecular level in order to remove stains caused by rust, minerals, corroding metals and more.

ADVANTAGES
  • Water-based
  • Cuts through stubborn oil and grease stains
  • Removes black environmental staining on multiple surfaces
  • Effectively cleans painted surfaces
  • Low odor
  • Cost-effective
  • Fast-acting

HORIZONTAL OR VERTICAL

This product is primarily used for horizontal surfaces as it is incompatible with glass and may cause stains if allowed to dry on the surface. 

COVERAGE RATE

600 to 3,000 feet per 5 gallon pail depending on dilution rate.

INTENDED USE 

This product is designed for use on most types of stone. Special precautions are required when using this product to clean limestone, marble or travertine.

RECOMMENDATIONS

We recommend the use of one of Presto's stone protective treatments to protect the newly restored surface for years:
  • Leach Stop® – Mineral Leaching Mitigation Treatment™

  • ElaSticone® – Silicone sealer for concrete, masonry and stone surfaces

  • ElaSticone® GSX – Silicone with graffiti protection for concrete, masonry and stone surfaces

  • Protect-A-Stone® – High-performance oil protection for stone surfaces

  • ReJuviSeal® – Rejuvenating oil protection for stone surfaces

NECESSARY EQUIPMENT 
  • Protective gear 
  •  Running water 
  • Chemical sprayer 
  • Pressure washer (optional) 
  • Stone brush (optional)
DILUTION

Stone Restore A+ should be used at a dilution rate of at least 3 to 1. For light stains, dilute 1 to 9 with water. For horizontal concrete with stubborn oil stains, start by using a 3 to 1 mix, then dilute as needed.

Stone Restore A+ Product Info Chart
Solvent Water Based
Flammable No
User Friendly No
Economically Efficient Yes
Environmentally Friendly No
Color Clear
Smell None

SURFACE PREPARATION 

Protect unintended surfaces from contact, including traffic and pedestrian areas below the project, electric tools, wood, furniture, fixtures and plants. Always test in a small, inconspicuous area prior to use.

APPLICATION 

Wet the surface prior to application. Have running water available to keep the surface damp. Apply an even coat of cleaner using a low-pressure (40 psi max.), chemical resistant sprayer. Keep area moistened with Stone Restore A+ to loosen soil. Immediately rinse any unintended surfaces, such as glass or frames. 

For deep stains, allow the cleaner to penetrate into the substrate for 10-20 minutes, but never allow surface to dry. 

After product has saturated the surface, rinse using a pressure washer and a white, 40-degree tip or a green, 25-degree tip. Keep the tip as far away from the surface as possible. If a pressure washer is not available, use a brush to help loosen stubborn soils. Always rinse area thoroughly to ensure no product is left behind.

Multiple applications may be required for heavily soiled, porous or absorbent surfaces. Apply immediately after initial application. Follow the same instructions for each application. For best results, rinse with heated, deionized water. 

Situations including various stone types or different natured stains may require multiple products. Presto’s stone cleaning line includes:
  • Stone Restore® HD For difficult to remove mineral stains caused by efflorescence, rusting, red clay, iron and more 
  • Stone Restore® NC For general cleaning of sensitive stone surfaces that require a neutral cleaner 
  • Stone Restore® CT A multi-purpose stone cleaner that removes a variety of stains from all types of stone materials 
PRECAUTIONS 

Take special precautions when using any alkaline cleaner. Stone Restore A+ may cause discoloration of stone or affect adhesion of water repellants if used incorrectly. Never let this product dry on surface. Product may cause etching on glass surfaces.

WARRANTIES

The information provided by Presto for the safe and effective use of this product, and all of our products, is believed to be good and accurate. However, due to the many different possible applications of this product, careful considerations should be made when selecting its suitability for each surface.

The information provided should never be substituted for individual testing to ensure the product’s compatibility with each surface intended for use. The purchaser shall assume all responsibility for determining the suitability of this product. When used as intended, this product will perform as stated. No other warranty can be made for this product, verbally or written.

Presto warrants this product to be free from defects. In the event this product is found to be defective, we will provide a sufficient amount of product to replace the defective product.

VIEW STONE RESTORATION & PROTECTION PICTURES

View our Stone Restoration Pictures Featuring projects that utilized our many products for their buildings restoration, maintenance or cleaning project.

After cleaning or sealing stone surfaces the glass windows and metal frames almost always need to be cleaned, and many time window spots and stains removed as well. View our glass and metal products that compliment our stone restoration and protection arsenal.

DON'T FORGET THE GLASS & METAL