SporeTech protects all surface types from stains caused by mold, mildew and algae.
This product installs an invisible, protective barrier on architectural surfaces that prevents stains and odors caused by micro-organisms, such as mold, mildew and algae, for at least two years. Features a dual-functionality molecule that adheres to surfaces and provides a protective, microscopic film.
250 to 350 sq. ft. per gallon.
Always test on a small, inconspicuous area prior to application. Ensure the surface is completely clean and free from all dirt, staining and biological growth using any of Presto’s cleaning products. Make sure to thoroughly rinse the material to ensure no product is left behind on the surface prior to sealing. Any cleaning product left on the surface can interfere with the protective coating. The use of deionized water is required to achieve full product performance. Protect all unintended surfaces. Never apply to a damp or wet surface. Do not apply in below-freezing temperatures. Use protective gear to prevent personal contact and inhalation of this product.
Use a low-pressure sprayer, roller, brush, sponge or lambs wool applicator. Product may be back rolled. Do not dilute; apply full strength. Apply product to create an even coat on the surface. Allow product to saturate surface. Do not allow product to pool on the surface and dry, or protection will be uneven and a residue may form. Remove excess material with a rag or towel.
A second coat may be needed for porous, absorbent surfaces or for superior protection. Subsequent coats should be applied in the same manner as the first while the initial application is drying. Never apply a second coat if two coats were not tested and approved prior to use.
Protection will begin immediately after sealant dries on the surface. Cure time for maximum water and stain protection is 24-72 hours. Protect surface from contact with water for at least 48 hours. Application rates, concentration, temperature and humidity can impact dry and cure time. Use towels or rags to polish the surface.
When using on stone: In many instances, a combination of different stone cleaning products is necessary for various stone surfaces depending on their level and type of staining. Presto offers a complete line of stone cleaning products for all situations, including:
The information provided by Presto for the safe and effective use of this product, and all of our products, is believed to be good and accurate. However, due to the many different possible applications of this product, careful considerations should be made when selecting its suitability for each surface.
The information provided should never be substituted for individual testing to ensure the product’s compatibility with each surface intended for use. The purchaser shall assume all responsibility for determining the suitability of this product. When used as intended, this product will perform as stated. No other warranty can be made for this product, verbally or written.
Presto warrants this product to be free from defects. In the event this product is found to be defective, we will provide a sufficient amount of product to replace the defective product.